Turbinas KingTech

Servicio Técnico y Ventas

K320G Restart

4.149 €

  • Diameter: 132.5mm
  • Lenght: 337mm
  • Weight: 2950g
  • Max. RMP: 100.000
  • Idle RMP: 30.000
  • Thurst: 32kg @ 15°C
  • EGT: 700°C
  • Fuel consumption: 870g/min
  • Fuel: Diesel, Petroleum, Jet A1 or Kerosene
  • Lubrication: 5% Turbine oil
  • Maintenance cycle: 25 hr USD300

K310G Restart

4.100 €

  • Diameter: 132.5mm
  • Lenght: 335mm
  • Weight: 2700g
  • Max. RMP: 103.000
  • Idle RMP: 30.000
  • Thurst: 31,3kg @ 15°C
  • EGT: 700°C
  • Fuel consumption: 840g/min
  • Fuel: Diesel, Petroleum, Jet A1 or Kerosene
  • Lubrication: 5% Turbine oil
  • Maintenance cycle: 25 hr USD300

K260G Restart

3.549 €

  • Diameter: 120mm
  • Lenght: 307mm
  • Weight: 2300g
  • Max. RMP: 112.000
  • Idle RMP: 33.000
  • Thurst: 26kg@ 15°C
  • EGT: 700°C
  • Fuel consumption: 760g/min
  • Fuel: Diesel, Petroleum, Jet A1 or Kerosene
  • Lubrication: 5% Turbine oil
  • Maintenance cycle: 25 hr USD300

K-210G Restart

2.999 €

  • Diameter: 112.6 mm (4.43″) 
  • Length: 286 mm (11.26″) 
  • Weight: 1650 g (3 lb. 10oz. ) 
  • RPM Range: 33,000-120,000RPM 
  • Thrust: 21 kg at max RPM ( 46.3 lbs at max RPM)
  • EGT: 700°C
  • Fuel consumption: 590 g / min ( 20.8 oz / min )
  • Fuel: Diesel, Jet A1, Kerosene
  • Lubrication: 5%, 3 to 5% for Diesel
  • Maintenance cycle: 25 hr USD300

K-180G Restart

2.749 €

  • Diameter: 114mm ( 4-1/2″ ) 
  • Weight: 1724g ( 3 lb. 12oz. ) 
  • RPM Range: 33,000 – 123,000 RPM
  • Thrust: 18 kg @ 123,000 RPM ( 40 lbs @ 123,000 RPM )
  • Exhaust gas temp.: 550° C-720° C ( 1022° F – 1328° F ) 
  • Fuel consumption: 545g / min ( 19.22 oz / min ) <~change
  • Fuel: Diesel, Jet A1, Kerosene
  • Lubrication: 5%, 3 to 5% for Diesel
  • Maintenance cycle: 25 hours

K160G Restart

2.549 €

  • Diameter: 103mm
  • Lenght: 260mm
  • Weight: 1460g
  • Max. RMP: 130000
  • Idle RMP: 33000
  • Thurst: 16kg @ 15°C
  • EGT: 700°C
  • Fuel consumption: 490g/min
  • Fuel: Diesel, Petroleum, Jet A1 or Kerosene
  • Lubrication: 5% Turbine oil
  • Maintenance cycle: 25 hr USD300

K-140G Restart

2.349€

  • Diameter: 113mm ( 4-1/2″ ) XJ0
  • Length: 270mm ( 10-1/2” ) – including starter
  • Weight: 1650 g ( 3lb. 10oz. ) 
  • RPM Range: 33,000 – 123,000 RPM
  • Thrust: 14 kg – 15° C ( 31 lbs @ 59° F. )
  • Exhaust gas temp.: 700°C ( 1292° F ) 
  • Fuel consumption: 400g / min—average ( 14.1 oz / min ) 
  • Fuel: Diesel, Jet A1, Kerosene
  • Lubrication: 5%, 3 to 5% for Diesel
  • Maintenance cycle: 25 hours

K120G Restart

2.199 €

  • Diameter: 95.25mm
  • Lenght: 254mm
  • Weight: 1280g
  • Max. RMP: 140000
  • Idle RMP: 42000
  • Thurst: 12kg @ 15°C
  • EGT: 700°C
  • Fuel consumption: 385g/min
  • Fuel: Diesel, Petroleum, Jet A1 or Kerosene
  • Lubrication: 5% Turbineoil
  • Maintenance cycle: 25 hr USD300

K-100TP Restart

4.199 €

  • Length: 405mm ( 15.94″ )
  • Weight: 2850g ( 6 lb. 4.5 oz. )
  • Maximum RPM: 140000
  • Power:13KW
  • EGT: 700°c max ( 1292°f max )
  • Maintenance cycle: 25 hr USD300

Fuel consumption: 360 g / min ( 8.46 oz. ) Fuel: Diesel, Jet A1, Kerosene
Lubrication: 5%

K-100G Restart

2.049 €

  • Diameter: 3-3/4″ (95.25mm)
  • Length: 10″ (254mm) – including starter
  • Weight: 2 lb. 14oz. (1300 g) – including starter
  • Maximum RPM: 142000
  • Thrust: 22 lb. @59° F. (10 KG @ 15° C.)
  • Idle: 43000rpm
  • Exhaust temperature: 1202° F (650° C) max
  • Fuel consumption: 11.84 oz / min (350 g / min)
  • Oil: 5% Turbine oil
  • Maintenance cycle: 25 hr USD300

K85G Restart

1.849 €

  • Diameter: 82mm
  • Lenght: 228mm
  • Weight: 880g
  • Max. RMP: 170000
  • Idle RMP: 50000
  • Thurst: 8,6kg @ 15°C 19,2lb
  • EGT: 700°C
  • Fuel consumption: 260g/min
  • Fuel: Diesel, Petroleum, Jet A1 or Kerosene
  • Lubrication: 5% Turbine oil
  • Maintenance cycle: 25 hr USD300

K-80G Restart

1.721 €

  • Diameter: 95.25mm ( 3-3/4″ )
  • Length: 254mm ( 10″ ) – including starter
  • Weight: 1304g ( 2 lb. 14oz. ) – including starter
  • Maximum RPM: 145000
  • Thrust: 8618 g @ 21.1° C. ( 19 lb. @ 70° F. )
  • Idle: 45000rpm
  • Exhaust temperature: 650° C ( 1202° F )max
  • Fuel consumption: 239 g / min ( 8.46 oz / min ) 
  • Fuel: Diesel, Jet A1, Kerosene
  • Lubrication: 5%, 3 to 5% for Diesel
  • Maintenance cycle: 25 hours

K70G Restart

1.799 €

  • Diameter: 76mm
  • Lenght: 195mm
  • Weight: 705g
  • Max. RMP: 180.000
  • Idle RMP: 55000
  • Thurst: 7,0kg @ 15°C
  • EGT: 700°C
  • Fuel consumption: 230g/min
  • Fuel: Diesel, Petroleum, Jet A1 or Kerosene
  • Lubrication: 5% Turbineoil
  • Maintenance cycle: 25 hr USD300

K-60TP Restart

3.580 €

  • Length: 385mm ( 15.15″ )
  • Weight: 2400g ( 5 lb. 4 oz. )
  • Maximum RPM: 160000
  • Power:7.3KW
  • EGT: 700°c max ( 1292°f max )
  • Maintenance cycle: 25 hr USD300

Fuel consumption: 240 g / min ( 8.46 oz. ) Fuel: Diesel, Jet A1, Kerosene
Lubrication: 5%

K-60G Restart

1.729 €

  • Diameter: 82mm ( 3.46″ ) 
  • Length: 228mm ( 11.39″) – including starter
  • Weight: 850g ( 1 lb 14oz ) – including starter
  • Maximum RPM: 162000MAX
  • Thrust: 6 kg @ 15° C. ( 13.22 lb @ 15° C )
  • Idle: 50000rpm
  • Exhaust temperature: 700MAX
  • Fuel consumption: 195 g / min ( 6.88 oz / min )
  • Oil: 5% Turbine oil
  • Maintenance cycle: 25 hr USD300

K-45TP Restart

3.099 €

  • Length: 335mm ( 13.19″ )
  • Weight: 1800g ( 3 lb. 15.5 oz. )
  • Maximum RPM: 170000
  • Power:5.2KW
  • EGT: 700°c max ( 1292°f max )
  • Maintenance cycle: 25 hr USD300

Fuel consumption: 180 g / min ( 8.46 oz. ) Fuel: Diesel, Jet A1, Kerosene
Lubrication: 5%

K-45G Restart

1.679 €

  • Diameter: 76mm (2.99″)
  • Length: 195mm (7.68″)
  • Weight: 700g (1 lb. 8.6 oz. )
  • Max. RPM: 162000
  • Thrust: 4.5 kg @ 15° C ( 9.9 lb @ 15° c )
  • EGT: 700°C max
  • Fuel consumption: 155 g / min ( 5.46 oz / min )
  • Fuel: Diesel, Jet A1, Kerosene
  • Lubrication: 5%
  • Maintenance cycle: 25 hr USD300

K-30G Restart

1749 €

  • Diameter: 62.9mm
  • Length: 160mm
  • Weight: 450g (Include internal valve, mount, Digital control system, FOD Screen)
  • Max. RPM: 235000
  • Thrust: 3kg+ @ 15° C
  • EGT: 720 °C max
  • Fuel consumption: 120 g / min
  • Fuel: Diesel, Jet A1, Kerosene
  • Lubrication: 5%
  • Maintenance cycle: 25 hr USD300

Servicio Técnico y Reparacion

Por favor, cuando nos envíe su turbina, asegúrese de enviarla en su caja, junto con:

  1. ECU
  2. Abrazadera de turbina
  3. Bomba de combustible
  4. Las válvulas de solenoide
  5. Completar el arnés de cableado

Junto con una breve descripción del problema y todo aquello que nos pueda ayudar a su reparación.